wizinspect gallery photo

WIZglass | About


Nextec WIZglass system is integrated in our WIZinspect system
WIZglass system uses the full functionality of Nextec WIZinspect measurement software for alignment, data analysis and flexible results reporting system
WIZglass system excels in scanning and measuring glass and other transparent materials from 0.1 mm thickness and up
Glass flexibility is not a problem due to the non-contact measurement method

Nextec WIZglass can perform in different modes
  • Scanning outer surfaces
  • Scanning inner surfaces
  • Thickness mode, scanning both sides of thin transparent material simultaneously

Mode switch is performed "on the fly" without any user intervention in the process
Nextec WIZglass system can measure parts in any 3D surface orientation

Key Benefits

  • WIZglass system accuracy for glass and other transparent materials is equal to our standard WIZinspect system accuracy with WIZpen sensor
  • WIZglass system suits both laboratory and manufacturing environments
  • WIZglass system single sensor is used for both topology measurement of transparent part geometric features, coordinate-system establishment (alignment) and thickness measurement
  • PH10 rotary head allows to set sensor orientation perpendicular to the measured surface
  • Both graphical and text reports can be easily customized to the application

Performance Specifications

Maximum scanning rate: 2000 points/sec
Scanning speed: up to 40 mm/sec
Stand-off distance: 18 mm
Dynamic range: ± 2 mm


  • Above parameters can be changed according to the specific application requirements with different WIZpen models
  • System can perform measurement of material thickness in range of 0.1 mm to 4mm
  • Range can be extended with different WIZpen models
  • Transparent material thickness can be measured both on flat or on curved surfaces